FORGOT YOUR ORBI NETGEAR LOGIN DETAILS? RESET AND RECOVER ACCESS

Forgot Your Orbi Netgear Login Details? Reset and Recover Access

Forgot Your Orbi Netgear Login Details? Reset and Recover Access

Blog Article

You’ve forgotten your Netgear Orbi login info, and now you can’t get into your router settings. It's quite frustrating, isn't it? The lockout prevents you from changing settings, updating firmware, or resolving network issues.

Orbi routers are excellent for whole-home Wi-Fi, no doubt. They give solid coverage and excellent speed. However, losing access to your admin page can prevent you from keeping a track on the device. You need that access to do the important stuff—set up security devices and edge devices and tweak your setup. So, getting back in is a big deal.

With the help of this guide, we’ll show you exactly how to reset or recover Orbi Netgear login details and take back control of your Orbi.

What Are the Orbi Netgear Login Details?

Before we learn how to recover the login details, let’s get clear on what these Orbi Netgear login errors are and why they matter.

When you first set up your Orbi router, it comes with basic Orbi Netgear login credentials.


  • Username: admin

  • Password: password


These are basic setup credentials to help you get started. You use these to get into the admin panel—basically the control room for your whole Wi-Fi setup. That’s where you can change the network name, set a new password, see which devices are connected, update firmware, customize the settings, etc.

Now here’s the thing—It’s important and is also advised to change the password right away to make your data secure. However, as time passes and you tend forget the password, you find yourself locked out. You can’t get back in unless you recover or reset it.

That’s why these Netgear Orbi login details are important. You can't access your network settings without them. Now, let's dive straight into the process of regaining access.

Step 1: Try Some Basic corrections, before a complete reset:

Before you go for a complete reset, there are a few easy things you can try that might just work and save you the hassle.

There are many individuals, who never modify their Orbi Netgear login credentials. Hence, you can try using the default login credentials:

  • Username: admin

  • Password: password


If you never bothered changing them — you’ll be able to log into the dashboard.

Check the Orbi Router’s Label
Flip your Orbi over or inspect its back. There’s usually a sticker with the login info. The default password is written on the label of the router.

Double Check Your Typing
Make sure you’re typing it right. This may seem insignificant, yet it occurs frequently. Passwords are case-sensitive. Is your caps lock on? This can cause issues. Also, don’t confuse “O” with zero or “l” with one.

How to Reset the Password?

  1. Try Default Netgear Orbi Login First


Many users don’t prefer changing the default login details of their device to avoid the hassle. So, if you’ve recently setup or reset your Orbi, there are good chances of default credentials still being in use.

  • Open browser > type orbilogin.com > dashboard appears.

  • Use the default credentials that are usually: (“admin” for username & “password” or “admin” for password).

  • If it works, you’ll enter Orbi Netgear login page. Else, password was changed before and now needs to be reset.



  1. Use Admin Password Recovery (If Enabled Before)


Orbi provides a password recovery feature. But it’ll only work if you’ve turned it ON before setting the password.

For Older Orbi Routers:

  1. Connect to Orbi WiFi Network.

  2. Open web browser > type URL: orbilogin.com

  3. Netgear Orbi Login window appears, tap “Cancel”

  4. Fill in the following details: serial number (on router’s label), security questions (answers are care-sensitive, i-e fill them exact as they were set).

  5. If your details are correct, you’ll reach a new page to set up a new password.

  6. Type new admin password and tap “Next”.

  7. Now login using the new password.


For Newer Orbi Routers:

  1. Navigate to URL: “orbilogin.com”.

  2. Enter wrong password 3 times

  3. Reset page will appear asking for the following details: serial number and security questions).

  4. Now follow the same procedure as given above for the Old Orbi Routers.



  1. Full Factory Reset


If you aren’t able to login through any of the given methods, the only way remaining is factory reset.

Factory Reset Process:

  1. Power ON the Orbi router

  2. Locate Reset button (small hole at back of the router).

  3. Press and hold the reset button for about 10-15 seconds. (Use a paperclip, pen or pin)

  4. Power LED flashes amber (orange) depicting the reset process has begun.

  5. Release the button. Reboot was successful.

  6. Your router has returned to its factory settings and you’ve to set it up again.

  7. Default credentials for your router are (Username: “admin”, Password: “password” or admin)


(Note: Default credentials are mentioned on the label of the router).

Step 4: Reconfigure Orbi After Reset

After reset, router needs to be reconfigured. You can do the setup either via browser or through Orbi mobile app.

Setup via Bowser:

  1. Connect to default Orbi WiFi (check label for SSID).

  2. Open browser > type orbilogin.com in the address bar.

  3. Follow on screen steps and change username and password.

  4. Set new admin password

  5. Configure security questions and enable password recovery. Tap “enter”.


You can also use Orbi App for configuration. App is available for both Android and iPhone users.

Now save your password securely after reset or store in the password manager.

Tips to Avoid Losing Access Again

  • Use strong password with a mix of letters, numbers, symbols

  • Enable recovery option and set easy to remember security questions

  • Store Orbi Netgear login info in password manager.

  • Update firmware often to avoid bugs and security risks


Step 5: Resetting the Satellite Too (If It’s Acting Weird).

In case your router is fine, but the satellite is the one acting up. If it’s not syncing, disconnecting, or giving you red or magenta lights, you might need to reset the satellite.

How to Reset Orbi Satellite:

  1. Find the reset button on the satellite unit.

  2. Long press the reset button for about 10-15 seconds.

  3. Wait for the LED to blink amber or turn off.

  4. Release the button and let it reboot.

  5. Reconnect it to the main router (You can do this via app or web interface).


Why Reset the Satellite?

  • It’s not syncing or connecting.

  • You moved it too far from the router, and now it’s out of range.


After the reset, you’ll need to add the satellite back to your Orbi system just like you did when you first bought it.

What to Do After Everything’s Reset (Post-Reset Checklist)

After the reset has been done whether for the router or the satellite. Give below is the post reset checklist:

  1. Plug the Router Back into the modem.
    Use an Ethernet cable. Make sure the internet LED turns on.

  2. Log In Again Using defaults.
    The default credentials are Admin/password, you can also check the label of your device for accurate details. Access via browser or Orbi app.

  3. Set a New SSID and password.
    Create a new network name and password to connect to that network. **Make it something easy to remember.

  4. Re-Add Satellites
    Sync the satellites again with the router using the app or WPS if supported.

  5. Update Firmware
    Go to settings and check for updates.

Report this page